Electricity and Water Features
Electricity and Water Features Water and electricity DO NOT MIX and since most water featuresrequire an electricity supply it is crucial to take precautionsto ensure the safety of anyone in the vicinity of the feature.Since it is much easier and also SAFER to install theelectricity before construction of your water feature iscomplete, this should be done in the initial stages. The need for safety in outdoor electrical installations isapparent, thus, all electrical work must be carried out by alicensed electrician. Before any electrical work commences check that the electrician: ? Is licensed (ask to see the licence) ? Will provide you with aCertificate of Compliance NEVER use makeshift wiring for outdoor installations, it issimply dangerous! Pond Pumps Incorrectly installed or damaged240 V electrical water pumps in garden ponds, may create aserious electric shock risk in SEOPressor and around the pond, resulting ininjury or death. This is because the risk of electric shock ishigher in the presence of water. A 240 V pond pump should be:? good quality and be purchased from a reputable retailer ?protected by an Safety Switch (RCD), that is tested by means ofthe integral test buttons at least every 3 months ? installed inaccordance with manufacturers’ instructions ? provided withcables that are protected against accidental damage ? maintainedin good working order, including cables and any connections ?switched off when carrying out pond cleaning. If any defects are found, switch off the water pump’s electricalsupply immediately and have the pump repaired by a licensedelectrician. Outdoor Lighting Incorrectly selected, installed ordamaged 230 V outdoor lighting installations may create a riskof electric shock, resulting in serious injury or even death.
No Responses to “Electricity and Water Features”